Parts by Type

print This page

Flange Yokes

Filters: JOINT ANGLE = 0, PILOT TYPE = M, BOLT HOLE COUNT = 4,
PART NUMBER SERIES PILOT TYPE PILOT DIA. BOLT CIRCLE DIA. BOLT HOLE COUNT BOLT HOLE DIA. C/L TO FACE SWING DIA. JOINT ANGLE NOTES VEHICLE CLASS BRAND
3102-188 1310 M 1.811 3.078 4 0.402 1.687 4.140 0 Square pattern, Toyota Car / 1310 version of 2302-23 with 10mm bolt holes LD PTI
2702-840 1751 M 1.850 3.301 4 0.413 1.188 4.189 0 BMW fronts, OSR, Used BMW fronts LD PTI
2702-770 1751 M 1.850 3.020 4 0.327 1.290 3.766 0 Square Pattern, OSR, BMW fronts LD PTI
2102-185 1210 M 1.850 3.307 4 0.412 1.250 4.125 0 Late model BMW with long pilot and bolts LD PTI
2102-27 1210 M 1.850 3.301 4 0.406 1.240 4.109 0 BMW Flange. Accepts half moon pressed in studs. LD PTI
3102-270 1310 M 1.850 3.307 4 0.406 1.750 4.109 0 BMW Flange. 2mm pilot depth. LD PTI
3102-271 1310 M 1.850 3.307 4 0.412 1.750 4.125 0 Late model BMW with 5mm long pilot and takes knurled bolts. LD PTI
3102-019 1310 M 1.906 3.530 4 0.400 2.080 4.725 0 Flange used on Kia shafts LD PTI
3102-20 1310 M 1.968 2.950 4 0.395 1.750 3.730 0 Nissan LD PTI
2-2-2029 1310 M 1.968 3.740 4 0.478 1.780 4.740 0 LD Spicer
1102-191 9951-22 M 1.968 3.200 4 0.411 1.125 4.049 0 Square Pattern, Staked, Infiniti Front Shafts LD PTI
2102-222 1210 M 2.244 2.997 4 0.400 1.500 3.780 0 Mercedes / Chrysler Front Shafts, Rectangular Pattern 1.96 x 2.25
 LD PTI
1202-252 1251 M 2.248 2.741 4 0.323 1.375 3.153 0 HONDA FLANGE YOKE, 44.8x53.3 rec LD PTI
2-2-899 1210 M 2.250 2.750 4 0.328 1.484 3.406 0 Rec Bolt Pattern / Same as 1202-39 but in 1210 Series. Fits Nissan cars and trucks up to about 1986. Then they used the 1202-20 and 1202-21. LD Spicer
10-2-29 1000 M 2.250 2.750 4 0.312 1.562 3.375 0 Rec Bolt Pattern LD Spicer
1402-221 1100 M 2.250 2.925 4 0.350 1.188 3.450 0 LD PTI
P10-2-29 1000 M 2.250 2.750 4 0.312 1.562 3.375 0 Rec Bolt Pattern LD PTI
2-2-1609 1310 M 2.375 3.125 4 0.406 1.625 3.875 0 Rec Bolt Pattern LD Spicer
2-2-1799 1310 M 2.559 3.750 4 0.406 1.772 4.625 0 1310 version of 1202-255 LD Spicer
2-2-1519 1310 M 2.559 3.346 4 0.406 1.766 4.158 0 Isuzu LD Spicer
2-2-489 1330 M 2.750 3.750 4 0.438 1.562 4.625 0 Rec Bolt Pattern LD Spicer
2-2-1209 1330 M 2.750 3.750 4 0.438 1.562 4.625 0 Rec Bolt Pattern LD Spicer
3-2-1329 1410 M 2.750 3.750 4 0.484 1.688 4.234 0 Rec Bolt Pattern LD Spicer
3-2-1639 1410 M 2.750 3.750 4 0.484 1.938 4.718 0 Proprietary to John Deere LD Spicer
T2-2-489A 1330 M 2.750 3.750 4 0.438 1.562 4.625 0 6061-T6 Forged Aluminum / 47% Lighter LD PTI
3-2-1549 1410 M 3.149 3.938 4 0.484 1.690 5.453 0 Rec Bolt Pattern / Bolt holes are on 36 degrees LD Spicer
3-2-1789 1410 M 3.750 4.750 4 0.509 2.000 5.750 0 Sq Bolt Pattern LD Spicer
3-2-939 1410 M 3.750 4.750 4 0.531 2.000 5.812 0 Rec Bolt Pattern LD Spicer
4-2-1149 1550 M 3.750 4.750 4 0.484 1.500 5.750 0 Rec Bolt Pattern / Active LD Spicer
3-2-1779 1410 M 3.750 4.750 4 0.480 1.750 5.094 0 LD Spicer